INTERIOR PANELS / TRIM  UPPER INSTRUMENT PANEL  INSTALLATION  

1.INSTALL UPPER INSTRUMENT PANEL

a.

Attach the 8 clips to install the upper instrument panel.

b.

for Single Type Airbag:

i.

Install the 2 bolts <C> or <D>.

ii.

Install the 2 bolts <B>.

Torque:

20 N*m (204 kgf*cm, 15 ft.*lbf)

iii.

Connect each connector.

5.042,4.427 5.583,4.427 5.583,4.427 5.802,4.552 true 5.177,4.74 5.177,4.427 true 4.344,5.219 4.5,5.219 4.5,5.219 4.531,5.063 true 1.323,0.917 1.531,0.917 1.531,0.917 1.677,1.031 true 5.917,0.938 5.656,0.938 5.656,0.938 5.521,1.052 true 4.854,4.354 5.167,4.552 0.313,0.198 10 *1 4.188,5.146 4.5,5.344 0.313,0.198 10 *3 5.927,0.854 6.24,1.052 0.313,0.198 10 *2 1.177,0.833 1.49,1.031 0.313,0.198 10 *2

*1	Bolt <B>	*2	Bolt <C> or <D>
*3	Airbag Connector	-	-

iv.

1.563,0.521 1.781,0.521 1.781,0.521 1.802,0.948 true 2.448,0.521 2.667,0.521 2.667,0.521 2.688,0.948 true 1.396,0.438 1.604,0.625 0.208,0.188 10 *1 2.281,0.427 2.49,0.615 0.208,0.188 10 *a

*1	Lock Slider
*a	Lock Position

Connect the airbag connector.

NOTICE:

When handling the airbag connector, take care not to damage the airbag wire harness.

v.

Check that the lock slider is in the lock position.

c.

for Dual Type Airbag:

i.

Install the 2 bolts <C> or <D>.

ii.

Install the 2 bolts <B>.

Torque:

20 N*m (204 kgf*cm, 15 ft.*lbf)

iii.

Connect each connector.

4.99,5.094 5.302,5.292 0.313,0.198 10 *1 1.646,0.583 1.958,0.781 0.313,0.198 10 *2 4.573,4.542 4.885,4.74 0.313,0.198 10 *4 5.396,0.583 5.708,0.781 0.313,0.198 10 *2 5.625,4.865 5.938,5.063 0.313,0.198 10 *1 4.49,5.177 4.802,5.375 0.313,0.198 10 *3

*1	Bolt <B>	*2	Bolt <C> or <D>
*3	Airbag Connector A	*4	Airbag Connector B

iv.

1.458,0.188 1.698,0.188 1.698,0.188 1.781,0.469 true 1.344,1.177 1.552,1.177 1.552,1.177 1.688,1.583 true 2.375,0.177 2.615,0.177 2.615,0.177 2.698,0.458 true 2.354,2.031 2.594,2.031 2.594,2.031 2.656,1.635 true 0.052,0.063 0.365,0.26 0.313,0.198 10 *1 0.052,0.99 0.365,1.188 0.313,0.198 10 *2 1.313,0.104 1.625,0.302 0.313,0.198 10 *3 2.229,0.073 2.542,0.271 0.313,0.198 10 *a 1.198,1.083 1.51,1.281 0.313,0.198 10 *3 2.208,1.927 2.521,2.125 0.313,0.198 10 *a

*1	Airbag Connector A
*2	Airbag Connector B
*3	Lock Slider
*a	Lock Position

Connect the 2 airbag connectors A and B.

NOTICE:

When handling the airbag connector, take care not to damage the airbag wire harness.

v.

Check that the lock slider is in the lock position.

62212 2.INSTALL FRONT PILLAR GARNISH LH (w/o Curtain Shield Airbag)

62211 3.INSTALL FRONT PILLAR GARNISH RH (w/o Curtain Shield Airbag)

62212 4.INSTALL FRONT PILLAR GARNISH LH (w/ Curtain Shield Airbag)

62211 5.INSTALL FRONT PILLAR GARNISH RH (w/ Curtain Shield Airbag)

86160P 6.INSTALL FRONT NO. 2 SPEAKER ASSEMBLY

55535B 7.INSTALL NO. 2 SPEAKER HOLE COVER (w/o Speaker)

a.

Attach the 2 guides, 2 clips and 2 claws to install the No. 2 speaker hole cover.

55525 8.INSTALL NO. 1 SPEAKER HOLE COVER (w/o Speaker)

55535B 9.INSTALL NO. 2 SPEAKER HOLE COVER (w/ Speaker)

55525 10.INSTALL NO. 1 SPEAKER HOLE COVER (w/ Speaker)

55550 11.INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

a.

1.875,1.563 2.031,1.76 0.156,0.198 10 false .

Protective Tape

Apply protective tape as shown in the illustration.

b.

Attach the 2 hinges to install the glove compartment door assembly.

c.

2.031,1.448 2.198,1.688 0.167,0.24 10 false . 1.969,1.417 2.125,1.615 0.156,0.198 10 false .

Protective Tape

While pushing in the sides of the glove compartment door assembly, attach the 2 stoppers.

d.

Connect the glove compartment door stopper sub-assembly.

55421B 12.INSTALL UPPER INSTRUMENT CLUSTER FINISH PANEL

55012A 13.INSTALL NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

a.

for LHD with Entry and Start System:

Connect the connector.

b.

Attach the 13 clips to install the No. 2 instrument panel garnish sub-assembly.

55900 14.INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)

55406B 15.INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (except Automatic Air Conditioning System)

a.

Connect each connector.

b.

Attach the 2 clips to install the lower center instrument cluster finish panel sub-assembly.

16.INSTALL HEADLIGHT DIMMER SWITCH

83100 17.INSTALL COMBINATION METER ASSEMBLY

55411G 18.INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL

a.

Attach the 11 clips and claw to install the No. 1 instrument cluster finish panel.

55521C 19.INSTALL STEREO OPENING COVER (w/o Audio)

a.

Attach the 4 clips to install the stereo opening cover.

b.

Install the 4 bolts.

86120 20.INSTALL RADIO RECEIVER ASSEMBLY (w/ Radio Receiver)

21.INSTALL NAVIGATION RECEIVER (w/ Navigation System)

83950M 22.INSTALL TELLTALE LIGHT ASSEMBLY

55670 23.INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

a.

Attach the 2 clips and 2 claws to install the No. 3 instrument panel register assembly.

55680A 24.INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

a.

Attach the 3 clips and claw to install the No. 4 instrument panel register assembly.

55412C 25.INSTALL CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL

a.

Attach the 6 clips and 2 claws to install the center No. 1 instrument cluster finish panel.

26.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

27.CHECK SRS WARNING LIGHT